Logo

B1411 Engine Code Repair

Meaning of B1411 engine trouble code is a kind of body trouble code and B1411 code can be about replacing a broken oxygen sensor can eventually lead to a busted catalytic convertor which can cost upwards of $2,200. Taking your car into a shop will cost you around $210 depending on the car. However, an oxygen sensor is easy to replace on many cars and is usually detailed in the owner's manual. If you know where the sensor is, you only have to unclip the old sensor and replace it with a new one. Regardless of how you approach it, you should get this fixed right away.

B1411 Fault Symptoms :

  1. Check engine light comes on
  2. Engine stalling or misfiring
  3. Engine performance issues
  4. Car not starting

If one of these reasons for B1411 code is occuring now you should check B1411 repair processes.
Now don't ask yourself; What should you do with B1411 code ?
The solution is here :

B1411 Possible Solution:

B1411 Engine

Air Conditioning Pressure Sensor (ACP) Insufficient Pressure Change Each time the A/C clutch engages, the PCM is looking for a pressure change in the refrigerant. If the change in pressure is outside of the calibration the DTC will set. A/C system mechanical failure Open ACP or VREF circuit A/C sensor damaged A/C system electrical failure A/C clutch always engaged Verify A/C system function, including refrigerant charge.

B1411 Code Meaning :

B
OBD-II Diagnostic Body (B) Trouble Code For Engine

1
Fuel And Air Metering

4
Throttle/Pedal Position Sensor/Switch A Circuit Intermittent

1
Cold Start Injector 1 Malfunction

1
Shift Solenoid E Performance or Stuck Off

The catalytic converter has an oxygen sensor in front and behind it. When the vehicle is warm and running in closed loop mode, the upstream oxygen sensor waveform reading should fluctuate.

B1411 OBD-II Diagnostic Body (B) Trouble Code Description

B1411 engine trouble code is about Shift Solenoid E Performance or Stuck Off.

Main reason For B1411 Code

The reason of B1411 OBD-II Engine Trouble Code is Throttle/Pedal Position Sensor/Switch A Circuit Intermittent.

B1411 DTC reports a sensor fault, replacement of the sensor is unlikely to resolve the underlying problem. The fault is most likely to be caused by the systems that the sensor is monitoring, but might even be caused by the wiring to the sensor itself.